A novel methodological approach to calibrate and validate three-dimensional (3D) finite element (FE) groundwater flow and geomechanical models has been implemented using Advanced Differential Interferometric SAR (A-DInSAR) data. In particular, we show how A-DInSAR data can be effectively used to (1) constrain the model set-up in evaluating the areal influence of the wellfield and (2) characterise the aquifer system, specifically the storage coefficient values, which represents a fundamental step in managing groundwater resources. The procedure has been tested to reconstruct the surface vertical and horizontal movements caused by the Manzanares-Jarama wellfield located northwest of Madrid (Spain). The wellfield was used to supply freshwater during major droughts over the period between 1994 and 2010. Previous A-DInSAR outcomes obtained by ERS-1/2 and ENVISAT acquisitions clearly revealed the seasonality of the land displacements associated to the withdrawal and recovery cycles that characterized the wellfield development. A time-lag of about one month, which is in the order of the time span between two SAR acquisitions, between the hydraulic head changes and the displacements has been detected in this site by a wavelet analysis of A-DInSAR and piezometer time series. The negligible delay between the forcing factor and the system response and the complete subsidence recovery when piezometric head recovers supported the understanding of a minor role played by the pore pressure propagation within clay layers and the almost perfectly elastic behavior of the system (viscosity is negligible), respectively. The developed geomechanical model satisfactorily reproduces the pumping-induced deformations with a Root Mean Square Error (RMSE) between observed and simulated land displacements in the order of 0.1-0.3 mm. The results give insights about the approach benefits in deeply understanding the spatio-temporal aquifer-system response to the management of this strategic water resource for Madrid.

3D groundwater flow and deformation modelling of Madrid aquifer

Roberta Bonì
;
Francesco Zucca;
2020-01-01

Abstract

A novel methodological approach to calibrate and validate three-dimensional (3D) finite element (FE) groundwater flow and geomechanical models has been implemented using Advanced Differential Interferometric SAR (A-DInSAR) data. In particular, we show how A-DInSAR data can be effectively used to (1) constrain the model set-up in evaluating the areal influence of the wellfield and (2) characterise the aquifer system, specifically the storage coefficient values, which represents a fundamental step in managing groundwater resources. The procedure has been tested to reconstruct the surface vertical and horizontal movements caused by the Manzanares-Jarama wellfield located northwest of Madrid (Spain). The wellfield was used to supply freshwater during major droughts over the period between 1994 and 2010. Previous A-DInSAR outcomes obtained by ERS-1/2 and ENVISAT acquisitions clearly revealed the seasonality of the land displacements associated to the withdrawal and recovery cycles that characterized the wellfield development. A time-lag of about one month, which is in the order of the time span between two SAR acquisitions, between the hydraulic head changes and the displacements has been detected in this site by a wavelet analysis of A-DInSAR and piezometer time series. The negligible delay between the forcing factor and the system response and the complete subsidence recovery when piezometric head recovers supported the understanding of a minor role played by the pore pressure propagation within clay layers and the almost perfectly elastic behavior of the system (viscosity is negligible), respectively. The developed geomechanical model satisfactorily reproduces the pumping-induced deformations with a Root Mean Square Error (RMSE) between observed and simulated land displacements in the order of 0.1-0.3 mm. The results give insights about the approach benefits in deeply understanding the spatio-temporal aquifer-system response to the management of this strategic water resource for Madrid.
2020
Seasonal deformation
Land subsidence
3D Finite Element (FE) groundwater and geomechanical model
A-DInSAR technique
Groundwater management
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.12076/16146
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 25
  • ???jsp.display-item.citation.isi??? 13
social impact